HumaStar 600
| User manual
34
Reactions
graphically review cuvette usage and change cuvettes.
Calibrations
request or browse pending acceptance, historic and in use
calibrations.
Blanks
definition, review and acceptance of reagent blanks.
Quality Control
request or browse QC and handle statistical functions.
Methods
browse and edit definitions of methods.
2.
Control bar
gives control over mayor automatic routine operation.
Initialize
initialize all instrument units to home positions.
Start
begin the routine operation.
Stop
stop the routine operation.
Suspend and restart dilutions.
Allows to momentarily stopping dilutions for sample and
STAT load.
3.
Running options
can be selected by operator according requirements which
depend on the moment and opportunity.
Non-stop operation:
when this option is selected, the automatic cycle does not
finish and after sample process instrument is in stand-by condition. This option
is recommended when additional samples for processing are expected soon.
For daily work end, deselect the option.
Process ISE assays:
disable if ISE samples are not expected for the day. This
option will not be shown if ISE module is not enabled.
Process Coagulation assays:
disable if coagulation samples are not expect-
ed for the day. This option will not be shown, if coagulation assays are not
enabled.
TABLE 4
Summary of Contents for HumaStar 600
