Human HumaStar 600, User Manual

Page: 49 / 132

routIne taSKS
45
5.1.3 LOADING NON BARCODED REAGENTS AND SOLUTIONS

To define a reagent into the tray, press Place Reagent , then from the win-
dow select the reagent and desired position and press
Ok
or press Cancel or Esc
key to abort. Defined reagent position will exhibit dark gray color.
To define a diluent or cleaning solution into the tray press
Place Solution
and
proceed as above.

It is also possible to click on a position in the reagent tray display, right click
and pick Place Reagent, Place Diluent Solution, Place Cleaning Solution options.
Select the desired reagent or solution and press Ok when done or Cancel to
abort.

Press
Apply Changes
and the reagent tray turn the selected position to the
bottle insert/remove area. Message will be: Put CREA-1 in position 2.

Open the cover, insert the reagent or solution bottle and close the cover.
Then press
Ok
to confirm the operation.
If more than one reagent is loaded, several messages will be shown in sequence.
5.1.4 REMOVING REAGENTS AND SOLUTIONS

To remove reagent/s from the tray, press
Remove Reagen t
, select one or
more reagent/s or desired positions. Press
Ok
when done or
Cancel
to abort.
After the placing or removing
reagents as described below,
press Apply Changes to start the
positioning sequence for vial
placement/removal.
FIGURE 44
If Apply Changes is not
pressed, selected positions
will remain in dark gray color and
cannot be used.