routIne taSKS
79
QC scheduler allows programming in advance all the QC actions on a weekly
basis.
The defined controls are shown in the lower part of the screen. They must be
dragged and dropped in the desired hour and day and then saved by pressing
the
Save
button. They are immediately in the Pending QC status shown in red
in the left side of the screen. They can be removed by dragging and dropping on
the trash symbol.
They remain as pending until they are in the list of programmed samples and all
the included reactions are processed. The Activity shows the next programmed
action on each control, but they are due immediately after programming. If only
some test are pending, warning flag will be in yellow color.
FIGURE 81
FIGURE 82
Summary of Contents for HumaStar 600
