Human HumaStar 600, User Manual

Page: 59 / 132

routIne taSKS
55
5.2.11 REPORTS
From the menu bar, select Reports .
Following reports can be generated:
Input Tray
Data of samples introduced by operator or through LIS.
Reagents Reagents and solutions already present in tray. Only those
used by the programmed samples are shown.
Method calibration The lot number (only when barcoded reagents are used),
the status of active calibrations and the calibration formu-
la used are shown.
Method abstract All methods are listed classified by type. Data include ID,
name and version.
Unit Conversion All defined unit conversions are displayed.
Reaction Trays Cuvette status for all cuvettes in both trays. Data include
condition, initial and actual air blank.
Online printing When laser or inkjet printers are used, samples are print-
ed once batch is ready. This option allows printing even if
batch is incomplete.
Photometer
calibration Data from the last performed photometer calibration.
Mechanical
Calibration
Values of the last mechanical calibration for trays, arm,
washers, etc.
Historic versions History of the method versions loaded on the system.
See section 6.1.
General Purpose
Bar Code
One page of general purpose barcodes will be displayed
and can be printed.
Usage Report of used reagents, run tests or used bottles can be
calculated for a defined periode can be displayed, printed
or exported.
In all options, the Report Preview window is open. To print, press the corre-
sponding icon or select File > Print .
FIGURE 54
TABLE 6