Human HumaStar 600, User Manual

Page: 119 / 132

maIntenance
115
8.4.4 INTENSIVE WASHER CLEANING
To provide a good cuvette cleaning the wash station should be cleaned at least
monthly using the instructions below. The procedure will take approximately
5 min. To open the Operation menu select:
1. Check the box for Front and Back in the “Intensive washer cleaning” section.
2. Select the C-Clean for the Solution to use.
3. Check if C-Clean (Ref 16663/20) is placed on the reagent tray.
4. Press to start the washer cleaning. At the end of the cleaning the sys-
tem starts a normal wash and drying cycle to clean the used cuvettes. The
scheduler will be updated automatically.
FIGURE 111
FIGURE 112