Procedure
Step 1
Specify a MIP generation granularity.
1.
Run:
system-view
The system view is displayed.
2.
Run:
cfm mip-granularity
{
port-service
|
port
}
A MIP generation granularity is specified.
Port MIPs are created by default.
NOTE
Either port or port-service MIPs can be created on a single device.
Step 2
Create MIPs.
1.
Manually configure MIPs.
a.
Run:
cfm enable (system view)
CFM is enabled globally.
b.
Run:
interface
interface-type interface-number
The interface view is displayed.
c.
(Optional) Run:
cfm mip
level
level
Port MIPs are manually created.
d.
(Optional) Run:
cfm mip
level-value
{
vlan
{
vlan-id1
[ to
vlan-id2
] } & <1-3> |
vsi
vsi-
name
|
mpls l2vc
l2vc-id
{
raw
|
tagged
} }
Port-service MIPs are manually created.
2.
Configure a device to automatically create MIPs.
MIP generation rules in compliance with either IEEE 802.1ag/Draft 7 or IEEE Std
802.1ag-2007 can be configured on a device.
l
Configure a MIP generation rule in accordance with IEEE 802.1ag/Draft 7 in the system
view.
Run:
cfm enable (system view)
CFM is enabled globally.
Run:
mip create-type
{
default
|
explicit
|
none
} [
interface
interface-type
interface-number
]
A MIP generation rule in accordance with IEEE 802.1ag Draft 7 is configured.
l
Configure a MIP generation rule in accordance with IEEE Standard 802.1ag-2007.
a.
Run:
cfm enable (system view)
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
8 Ethernet OAM Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
480
