l
Run the
display l2tp tunnel rui
[
tunnel-item
tunnel-id
|
tunnel-name
remote-name
|
bas-
interface
{
interface-name
|
interface-type
interface-number
} |
remote-backup-profile
profile-name
|
remote-backup-service
service-name
] command to check L2TP tunnel
backup information.
l
Run the
display l2tp session rui
[
session-item
session-id
|
source-ip
source-ip-address
|
destination-ip
destination-ip-address
|
bas-interface
{
interface-name
|
interface-type
interface-number
} |
remote-backup-profile
profile-name
|
remote-backup-service
service-name
] command to check L2TP session backup information.
l
Run the
display l2tp statistics rui
[
verbose
] command to check L2TP tunnel backup
statistics.
l
Run the
display l2tp lac abnormal-rui-users
command to check information about users
that have abnormal online status on a device enabled with L2TP two-node hot backup.
l
Run the
display access-user domain
command to display information about the access
users in a specified domain.
----End
Example
After completing L2TP two-node hot backup configurations, run the
display remote-backup-
profile
command. If the following information is displayed, the preceding configurations are
successful:
l
The value of the
Service
field is
bras l2tp
.
<HUAWEI>
display remote-backup-profile profile1
-----------------------------------------------
Profile-Index : 0x800
Profile-Name : profile1
Service : bras l2tp
Remote-backup-service : s1
Backup-ID : 10
track protocol : VRRP
VRRP-ID : 1
VRRP-Interface : Eth-Trunk1.2
Interface :
Eth-Trunk1.1
State : Master
Peer State : Slave
Backup mode : hot
Slot-Number : --
Card-Number : --
Port-Number : --
Traffic threshold : --
Traffic interval : 1(minutes)
[HUAWEI]
display l2tp tunnel rui
LTID: local assigned tunnel ID , RTID:Remote assigned tunnel ID
RA:Remote Ip address, RN: Remote Name; RG: Register(L:local,R:remote)
Basic Info Redundant info
------------------------------------------------------------------------------
LTID RTID RA RN Sessions RG state Life(s)
------------------------------------------------------------------------------
7 86 3.3.3.3 HUA-241 1 L active 14s
------------------------------------------------------------------------------
Total 1, printed 1
[HUAWEI]
display l2tp session rui
LTID: local assigned tunnel ID , RTID: Remote assigned tunnel ID
LSID: local assigned session ID , RSID: Remote assigned session ID
RG: Register(L:local,R:remote), FWS: Fowarding state(L:local interface, P:protect
path).
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
11 Multi-node Backup Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1184
