HP XP20000/XP24000 Manual Download Page 59

Page: 59 / 448

Table 12 Error Codes — Part Code 0210

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

To disable the specified user,
click [OK]. Otherwise, click
[Cancel].

Are you sure you want to
disable the specified user?

65637

0210

To enable the specified user,
click [OK]. Otherwise, click
[Cancel].

Are you sure you want to
enable the specified user?

65638

0210

Table 13 Error Codes — Part Code 0290

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Specify the user ID.

Enter the user ID.

5010

0290

Input the correct user name
or password.

The user ID or password is
invalid.

5014

0290

You can specify the user ID
with up to 16 characters.

Enter the user ID with up to
16 alphanumeric characters.

5015

0290

Correct the specified content,
and retry.

The Password is invalid.
Access Denied.

5016

0290

Input the correct password.

The password is invalid.

5020

0290

Input the correct password.

The password is invalid.

5021

0290

Input the correct password.

The new password is invalid.

5022

0290

Remove the invalid characters
and retry.

You cannot use the following
characters: " # & = + \ , ; :
* ? < > | /

5030

0290

Remove the multi-byte
characters and retry.

You cannot use multi-byte
characters.

5040

0290

The user ID is already
registered.

5050

0290

You cannot register anymore.

The number of user accounts
exceeds the maximum.

5060

0290

Input the password again.

The current password is
invalid.

5070

0290

Specify the correct password.

The password is invalid.

5080

0290

Reply to this message.

The RMI time-out period is too
short compared to the time to
keep the RMI object.

5090

0290

Reply to this message.

The Polling period is too long
compared to the time to keep
the RMI object.

5100

0290

Reply to this message.

Specify at least 1 polling
method.

5101

0290

Check the settings.

The Status Window Hidden
Option is specified but [NO]
is not selected for the Polling
period for checking obstacles
Option. Are you sure you
want to register the
parameters?

5102

0290

Remote Web Console Error Codes

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands