HP XP20000/XP24000 Manual Download Page 352

Page: 352 / 448

Table 61 Error Codes — Part Code 7005

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

You cannot use the volume.
Specify other volume, and
retry the operation.

The specified volume is for
backup servers only.

8580

7005

Check the contents, and retry.

The specified volume is not
for backup servers only.

8581

7005

Wait a few seconds, and
retry the operation.

The emulation type of the
target volume is being
changed.

8582

7005

Specify a volume of the
supported RAID level.

The RAID level of the
specified volume is not
supported.

8583

7005

Check the contents, and retry.

No volume is defined as a
reserved volume.

8584

7005

Stop the operation of the
Reserve volume setting, or
delete the Reserve volume.

The number of reserved
volumes exceeds the
maximum.

8585

7005

Check the contents, and retry.

The number of groups that
can be set in the same
subsystem is invalid.

8586

7005

Check the contents, and retry.

The number of pairs that can
be set in the same group is
invalid.

8587

7005

Check the contents, and retry.

The specified group number
is not set.

8588

7005

Check the contents, and retry.

The specified group name is
invalid.

8589

7005

Check the contents, and retry.

The group name and the
number do not match.

8590

7005

Check the contents, and retry.

The specified pair is already
set in another group.

8591

7005

Check the capacity of the
installed license key. To
create more pairs, purchase
a license key for larger
capacity.

The command was rejected,
because the licensed capacity
was exceeded.

8592

7005

Release the XP Auto LUN
setting.

The P-VOL is a source volume
for Auto LUN.

8593

7005

Release the XP Auto LUN
setting.

The P-VOL is a target volume
for Auto LUN.

8594

7005

Refresh, and then retry the
operation.

The specified P-VOL does not
exist.

8595

7005

Release the Reserve attribute
of the specified volume.

The specified volume is a
reserved volume.

8596

7005

352 Remote Web Console for Storage System Messages and Error Codes

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands