HP XP20000/XP24000 Manual Download Page 371

Page: 371 / 448

Table 64 Error Codes — Part Code 7105

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Detach the S-VOL from the
host, or delete the XP
Continuous Access path.

You cannot reserve the
volume, because a path
group is set.

8511

7105

Vary the S-VOL offline from
the mainframe host, and then
issue the command again.

Cannot perform Resync or
Suspend operation because
of the path group setting.

8512

7105

Vary the S-VOL offline from
the mainframe host, and then
issue the command again.

The command has been
rejected, because the
specified S-VOL is used by the
host.

8513

7105

Delete the Reserve volume.

No reserved volume can be
allocated.

8514

7105

Check the contents, and retry.

The number of cylinders in the
reserved volume exceeds the
maximum.

8515

7105

Check the contents, and retry.

The number of S-VOL
cylinders exceeds the
maximum.

8516

7105

Check the contents, and retry.

The number of T-VOL
cylinders exceeds the
maximum.

8517

7105

Check the emulation type.

You cannot create a pair,
because the track format is
different for each. Make sure
that the specified emulation
type is the same for both.

8518

7105

Check the volume capacity.

You cannot set a pair
because the number of
cylinders is different for each.
Make sure that the capacity
is the same for both.

8519

7105

Specify the volume with the
same emulation type, and
retry the operation.

You cannot set a pair,
because the volume type is
different for each.

8520

7105

Check the contents, and retry.

The number of multiple copy
jobs exceeded the maximum.

8521

7105

Specify the supported
emulation type.

The emulation type of the
S-VOL is not supported.

8522

7105

Specify the supported
emulation type.

The emulation type of the
T-VOL is not supported.

8523

7105

Specify the supported
emulation type.

The emulation type is not
supported.

8524

7105

Call HP technical support.

An internal logic error
occurred.

8525

7105

Call HP technical support.

An internal logic error
occurred.

8526

7105

Call HP technical support.

An internal logic error
occurred.

8527

7105

Remote Web Console Error Codes

371

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands