HP XP20000/XP24000, Manual

Page: 225 / 448

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level Severity
Level Recommended Action Error Message Error
Number Part
Code
4 E Take either of the following
actions:
1. Check the serial number,
SSID or CU number of the
RCU, and retry the
operation with correct
parameters.
2. Check the connection LCP
ports of the RCU. Connect
the path correctly, and
retry the operation.
The serial number, SSID or
CU number of the RCU is
invalid. 8755 6005
4 i Check the storage system
cache status of the MCU from
the host. If it is off, set it on
and retry. If it cannot be set
on, call HP technical support. MCU disk array cache is not
active. 8756 6005
4 W There is an invalid cache or
shared memory status on the
MCU. Check the status and
recover the cache or shared
memory, and then retry the
operation. One side of the Cache or
shared memory on the MCU
is blocked. 8757 6005
4 W Call HP technical support. Unexpected error on MCU. 8758 6005
4 i Call HP technical support. RCU Subsystem Cache status
is not active. 8759 6005
4 i Check the track formats of the
specified M-VOL and R-VOL. M-VOL and R-VOL Track
Formats do not match. 8760 6005
4 W Verify the following items for
the specified M-VOL and
R-VOL.
•
If the emulation types
match each other.
•
In the case of LUSE
volume, if the capacity of
each volume combined in
the LUSE matches each
other.
•
In the case of mainframe
system, if the capacity of
copy target is larger than
that of copy source.
The operation failed because
the specified volumes were in
one of the following statuses:
•
The emulation types of
M-VOL and R-VOL do not
match.
•
The capacities of M-VOL
and R VOL do not match.
•
LUSE volume is specified
for M VOL and R-VOL,
and the capacity of each
volume combined in the
LUSE does not match each
other.
8761 6005
4 i Check the device cache
status of R-VOL from host. If
it is off, set it on and retry. If
it cannot be set on, call HP
technical support. R-VOL Device Cache status is
not active. 8762 6005
4 i Check the DFW status of the
R-VOL from the host. If it is
off, set it on and retry. If it
cannot be set on, call HP
technical support. R-VOL DFW status is not
active. 8763 6005
4 W Confirm the status of the
specified R-VOL. The specified R-VOL is not
usable. 8764 6005
Remote Web Console Error Codes 225