HP XP20000/XP24000 Manual Download Page 430

Page: 430 / 448

Table 83 Error Codes — Part Code 9107

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

6012

9107

If this problem persists, call
HP technical support.

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

7060

9107

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

7111

9107

Table 84 Error Codes — Part Code 9110

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Click [OK], set data, and
retry the operation.

No data has been changed.

5122

9110

Click [OK], delete
unnecessary hosts, and retry
the operation.

You cannot register any more
hosts.

5605

9110

Click [OK], delete some of
the registered groups and
make settings.

You cannot define any more
groups.

5610

9110

Click [OK, and then register
another name.

The specified name has
already been used.

5611

9110

Click [OK], check the entered
characters, and register the
name again.

The specified name includes
some invalid characters.

5612

9110

Click [OK], check the
registered hosts, and retry the
operation.

The specified host is included
in another group.

5613

9110

Click [OK], check the
registered LDEVs, and retry
the operation.

The specified LDEV is
included in another group.

5614

9110

Click [OK], check the entered
name, and retry the
operation.

The entered name is invalid.

5615

9110

Click [OK], check attributes
of the security group, and
retry the operation.

Some attributes of the security
group are invalid.

5616

9110

Click [OK], check attributes
of the security group, and
retry the operation.

Attributes of the security
group differ from the
attributes of other related
security groups.

5617

9110

Click [OK], check the current
settings, and retry the
operation.

The target logical device has
already been defined to
another security group. Also,
the security group contains
the same host in the target
security group.

5618

9110

430 Remote Web Console for Storage System Messages and Error Codes

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands