HP XP20000/XP24000 Manual Download Page 133

Page: 133 / 448

Table 33 Error Codes — Part Code 2010

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Correct the settings, and then
retry.

The LUSE volume cannot be
released because the access
attribute of the specified
volume is not Read/Write.

5030

2010

Correct the specified content,
and retry.

Select the non-LUSE LDEV.

5031

2010

Correct the specified content,
and retry.

There are no LDEVs available
to set the LUSE top volume.
Check the specified LDEVs.

5032

2010

Correct the specified content,
and retry.

There are no LDEVs available
to create the LUSE. Check the
specified LDEVs.

5033

2010

Select LDEV and retry.

No LDEV is specified.

5050

2010

Check the content of the
operation.

You cannot delete the first
LDEV of a LUSE volume.

5051

2010

Check the content of the
operation.

This is the last path for the
LUSE volume.

5052

2010

Check the content of the
operation.

You should map at least one
path to LUSE volume.

5053

2010

Check the content of the
operation.

More than 36 volumes
cannot be combined to form
a LUSE.

5054

2010

Follow the correct operation
procedure.

The size of the LUSE volume
exceeds 64,424,505,600
KB.

5055

2010

Follow the correct operation
procedure.

The specified LDEV is
inaccurate.

5056

2010

Click [OK] to continue the
operation. Click [Cancel] to
stop the operation.

Are you sure you want to
perform the LUSE operation
on a volume that has a path
definition?

5812

2010

Specify the LUSE displayed
in blue bold italic characters.

There are no LUSE volumes
that can be reset. Check the
specified volumes.

5815

2010

Call HP technical support.

An error occurred in the client
logic.

7060

2010

The specified volumes will be
expanded to LUSE volume.
All data in each LDEV will be
initialized. Do you want to
continue?

9010

2010

The specified LUSE volume
will be released. All data in
the volume will be initialized.
Do you want to continue?

9060

2010

The LUSE volume needs at
least one path. Do you want
to continue the operation?

9100

2010

Select the LUSE.

9150

2010

Remote Web Console Error Codes

133

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands