HP XP20000/XP24000 Manual Download Page 439

Page: 439 / 448

Table 87 Error Codes — Part Code 9605

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Select another volume.

The attribute of the virtual
volume of the XP Snapshot
cannot be changed.

58413

9605

Select another volume.

The attribute of the P-VOL or
the S-VOL of the XP Snapshot
cannot be changed.

58414

9605

Select another volume.

The VMA of the pool volume
cannot be changed.

58415

9605

Select another volume.

The VMA of the P-VOL or the
S-VOL of the XP Snapshot
cannot be changed.

58417

9605

Release or suspend the XP
Continuous Access Journal
volume.

The access attribute cannot
be changed, because the
status of the specified XP
Continuous Access Journal
volume is in “PAIR” or in
“COPY”.

58418

9605

Suspend the remote copy
pair or delete the pair, and
then retry the operation.

The access attribute of a
primary or a secondary
volume for remote copy
cannot be changed when
VMA is set.

58419

9605

Release the LUSE volume, or
set VMA for a different
logical volume.

VMA cannot be set for the
specified logical volume,
because the specified logical
volume is a LUSE volume.

58420

9605

If this problem persists, call
HP technical support.

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

58422

9605

If this problem persists, call
HP technical support.

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

58423

9605

Restore the logical volume.

The specified logical volume
is blocked.

58424

9605

Release the journal volume of
XP Continuous Access
Journal, or set up the VMA
on another logical volume.

A VMA cannot be set up on
this logical volume because
the logical volume is being
used as a journal volume of
XP Continuous Access
Journal.

58425

9605

Set the extent to another
logical volume.

Extents are already set to the
specified logical volume.

58426

9605

Set the VMA.

VMA is not set to the
specified logical volume.

58427

9605

Set the extents.

Extents are not set to the
specified logical volume.

58428

9605

Make the setting to another
logical volume.

A retention term is set to the
specified logical volume.

58429

9605

Remote Web Console Error Codes 439

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands