HP XP20000/XP24000 Manual Download Page 350

Page: 350 / 448

Table 61 Error Codes — Part Code 7005

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

You cannot execute the
operation for the volume
which is not implemented.

The P-VOL is not
implemented.

8549

7005

•

Restore the blocked
volume, and then retry the
operation.

•

The system disk cannot be
specified as a P-VOL.
Specify another volume.

The command has been
rejected, because the
specified P-VOL is blocked or
used as a system disk.

8550

7005

Wait until the volume is
formatted, and retry the
operation.

The P-VOL is being formatted.

8551

7005

Check the target volume.

This volume cannot be
specified as a P-VOL because
it is used as a command
device.

8552

7005

You cannot execute the
operation for the volume
which is not implemented.

The S-VOL is not
implemented.

8553

7005

•

Restore the blocked
volume, and then retry the
operation.

•

The system disk cannot be
specified as an S-VOL.
Specify another volume.

The command has been
rejected, because the
specified S-VOL is blocked or
used as a system disk.

8554

7005

Wait until the volume is
formatted, and retry the
operation.

The S-VOL is being formatted.

8555

7005

Specify a volume that is not
used as a command device
as an S-VOL.

This volume cannot be
specified as an S-VOL
because it is used as a
command device.

8556

7005

You cannot execute the
operation for the volume
which is not implemented.

The volume is not
implemented.

8557

7005

•

Restore the blocked
volume, and then retry the
operation.

•

The system disk cannot be
specified as a reserved
volume. Specify another
volume.

The command has been
rejected, because the
specified volume is blocked
or used as a system disk.

8558

7005

Wait until the volume is
formatted, and retry the
operation.

The volume is being
formatted.

8559

7005

Specify a volume that is not
used as a command device.

This volume cannot be
specified because it is used
as a command device.

8560

7005

Call HP technical support.

The command code is
invalid.

8561

7005

350 Remote Web Console for Storage System Messages and Error Codes

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands