HP XP20000/XP24000 Manual Download Page 237

Page: 237 / 448

Table 50 Error Codes — Part Code 6005

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Confirm the PCB type and try
the operation again with a
correct parameter.

There are no PCBs which
corresponds to the specified
port type.

8876

6005

Call HP technical support.

An internal error occurred.

8877

6005

Verify that the CT group is
active in the MCU.

CT Group is not active.

8878

6005

Verify that there are no active
asynchronous pairs in this
group, and retry the
operation.

At least one asynchronous
pair is active in this group.

8879

6005

Retry the operation after the
pair status has been changed
to simplex.

Wait. Retry Delete Group
operation in a few minutes.

8880

6005

Call HP technical support.

An internal error occurred.

8881

6005

Delete all of the XP
Continuous Access CT
groups, and then retry the
operation.

Asynchronous Option
(Current Pending Update
Data Rate) cannot be
changed, because the CT
group is active.

8882

6005

Call HP technical support.

An internal error occurred.

8883

6005

Call HP technical support.

An internal error occurred.

8884

6005

Call HP technical support.

An internal error occurred.

8885

6005

Call HP technical support.

An internal error occurred.

8886

6005

Call HP technical support.

An internal error occurred.

8887

6005

Call HP technical support.

An internal error occurred.

8888

6005

Refresh the window, and
retry. If nothing changes, call
HP technical support.

The specified port is not
equipped.

8889

6005

Wait until the initialization of
the port ends, and retry the
operation.

The specified port is being
initialized.

8890

6005

Delete the logical paths on
the specified port and retry
the operation.

Logical paths exist on the
MCU port.

8891

6005

To continue this operation,
click [Yes]. If not, click [No].

R-VOLs exist on the RCU port.
Are you sure you want to
continue this operation?

8892

6005

Call HP technical support.

An internal error occurred.

8893

6005

Stop the jobs from the host
and retry the operation.

Pending background data
exists on the MCU.

8894

6005

Stop the jobs from the host
and retry the operation.

Pending background data
exists on the RCU.

8895

6005

Refresh the window, and
retry. If nothing changes, call
HP technical support.

A parameter error occurred.

8896

6005

Remote Web Console Error Codes 237

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands