HP XP20000/XP24000 Manual Download Page 367

Page: 367 / 448

Table 63 Error Codes — Part Code 7010

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Apply the data in the Preview
List. To stop the transaction,
click [OK] and continue the
operation.

The data has been changed.
If you select another tab
(page), the settings will be
discarded. Are you sure you
want to continue?

5121

7010

Go on to the next operation.

No data has been changed.

5122

7010

Check the password.

The password is invalid.

5123

7010

Multiple volumes cannot be
processed in the operation.
Process one volume at a time.

You cannot select more than
one operation at a time.

5124

7010

Select the target volume.

No target volume is selected.

5125

7010

You cannot create L2 pair for
the specified P-VOL. Delete
the created L2 pair, and retry
the operation.

You cannot create another L2
pair, because the number of
L2 pairs exceeds the
maximum.

5126

7010

Select the other MU number.

The specified MU number is
invalid. Select another MU
number.

5127

7010

You cannot create L1 pair for
the specified P-VOL. Delete
the created L1 pair, and retry
the operation.

The number of L1 pairs
exceeds the maximum.

6504

7010

You cannot create L2 pair for
the specified P-VOL. Delete
the created L2 pair, and retry
the operation.

The number of L2 pairs
exceeds the maximum.

6505

7010

Call HP technical support.

Unregistered error code.

7310

7010

Wait a few seconds, and
retry the operation. If the
error occurs after retrying,
call HP technical support.

The settings could not be
applied.

7311

7010

Call HP technical support.

The password could not be
acquired.

7312

7010

Call HP technical support.

Error details not available.

7313

7010

If this problem persists call HP
technical support.

An error occurred during
processing. If this problem
persists, call HP technical
support.

7440

7010

Call HP technical support.

An internal logic
contradiction occurred.

8534

7010

Check the error code in the
Preview list.

Some settings could not be
applied normally. See the
error code.

8658

7010

Mount the required PCB, and
then retry the operation.

The PCB required for this
operation is not mounted.
Check the subsystem
configuration.

8659

7010

Remote Web Console Error Codes 367

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands