HP XP20000/XP24000 Manual Download Page 185

Page: 185 / 448

Table 41 Error Codes — Part Code 4010

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Correct the specified content,
and retry.

No deletion area is specified.
Retry the operation to specify
the deletion area.

5030

4010

Correct the Cache Residency
settings, and then retry the
operation.

The Cache Residency settings
that exceed the maximum
size or maximum available
area are invalid.

5058

4010

Call HP technical support.

An error occurred in the client
logic.

7060

4010

An error occurred. If this
problem persists, call HP
technical support.

An error occurred during
processing. If this problem
persists call HP technical
support.

7440

4010

The normal end was carried
out. Click [OK] and close the
dialog.

Prestaging has completed.

9000

4010

The system will set the
contents.

9010

4010

Do you want to delete?

9060

4010

The information for the
program product will be reset
if you click [OK]. The
information will not be reset
if you click [Cancel].

Are you sure you want to
reset the P.P. information?

9340

4010

To perform the prestaging
operation, click [Yes]. To not
perform the prestaging
operation, click [No].

Prestaging will be carried out
to the selected LDEV. Do you
want to continue?

59035

4010

Reduce the number of Extents
in the LDEV.

The number of Extents in the
LDEV has exceeded the
maximum.

65643

4010

Table 42 Error Codes — Part Code 4105

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Install the necessary program
product.

This functionality is not
available. Cache Residency
Manager is required.

1603

4105

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

An error occurred during
server processing. If this
problem persists, call HP
technical support.

6012

4105

If the same problem persists
despite retrying, call HP
technical support.

An error occurred during
server processing. If this
problem persists, please call
HP technical support.

6023

4105

Wait a few seconds, and
then retry the operation.

The disk subsystem is busy.
Please wait for a while, and
then retry the operation.

6510

4105

Remote Web Console Error Codes 185

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands