HP XP20000/XP24000 Manual Download Page 373

Page: 373 / 448

Table 64 Error Codes — Part Code 7105

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Call HP technical support.

Failed to complete the initial
shared memory setup.

8542

7105

Call HP technical support.

The shared memory size is
different.

8543

7105

Check the contents, and retry.

16 Mbytes of shared memory
is available.

8544

7105

Call HP technical support.

A power supply failure is
detected.

8545

7105

Retry the operation with
power ON.

The command was rejected.
The PS OFF is in progress.

8546

7105

Call HP technical support.

A data transfer failure is
detected (CHA).

8547

7105

Call HP technical support.

A data transfer failure is
detected (DKA).

8548

7105

You cannot execute the
operation for the volume
which is not implemented.

The S-VOL is not
implemented.

8549

7105

•

Restore the blocked
volume, and then retry the
operation.

•

The system disk cannot be
specified as an S-VOL.
Specify another volume.

The command has been
rejected, because the
specified S-VOL is blocked or
used as a system disk.

8550

7105

Wait until the volume is
formatted, and retry the
operation.

The S-VOL is being formatted.

8551

7105

As the S-VOL, specify a
volume that is not used as a
command device.

This volume cannot be
specified as an S-VOL
because it is used as a
command device.

8552

7105

You cannot execute the
operation for the volume
which is not implemented.

The T-VOL is not
implemented.

8553

7105

•

Restore the blocked
volume, and then retry the
operation.

•

The system disk cannot be
specified as a T-VOL.
Specify another volume.

The command has been
rejected, because the
specified T-VOL is blocked or
used as a system disk.

8554

7105

Wait until the volume is
formatted, and retry the
operation.

The T-VOL is being formatted.

8555

7105

Release the command device,
and then retry the operation.

This volume cannot be
specified as an T-VOL
because it is used as a
command device.

8556

7105

You cannot execute the
operation for the volume
which is not implemented.

The volume is not
implemented.

8557

7105

Remote Web Console Error Codes 373

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands