HP XP20000/XP24000 Manual Download Page 435

Page: 435 / 448

Table 85 Error Codes — Part Code 9205

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Check the contents of the
Volume Retention Manager
spreadsheet.

The number of digits is
invalid.

66008

9205

Check the contents of the
Volume Retention Manager
spreadsheet.

The entered value is outside
the setting range.

66009

9205

Check the contents of the
Volume Retention Manager
spreadsheet.

The format is invalid.

66010

9205

Check the contents of the
Volume Retention Manager
spreadsheet.

An unnecessary item is
included in the entered
definition.

66011

9205

Check the contents of the
Volume Retention Manager
spreadsheet.

The same definition exists in
the spreadsheet file. (The
combination of a CU number
and an LDEV number is
repeated.)

66012

9205

Enter a correct attribute in the
[Attribute] of the spreadsheet
(enter Read/Write, Read
Only, or Protect).

The access attribute set in the
[Attribute] of the spreadsheet
is incorrect (an attribute other
than Read/Write, Read Only,
or Protect is entered).

66013

9205

Check the logical volume
configuration, and then retry
the operation.

This logical volume cannot be
selected because it is used as
a volume for System Disk.

68002

9205

Table 86 Error Codes — Part Code 9210

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

If this problem persists, call
HP technical support.

An error occurred during
processing. If this problem
persists, call HP technical
support.

7060

9210

If this problem persists, call
HP technical support.

There is an invalid value in
the Volume Retention
Manager information.

7442

9210

If this problem persists, call
HP technical support.

The VTOC information
contains one or more invalid
values.

7443

9210

Mount volumes, and then
retry the operation.

There is no valid volume.

8112

9210

To continue processing, click
[OK]. To stop processing,
click [Cancel].

The value that is under setup
is not reflected yet. Do you
want to continue the
operation?

9107

9210

Remote Web Console Error Codes 435

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands