HP XP20000/XP24000 Manual Download Page 421

Page: 421 / 448

Table 76 Error Codes — Part Code 8510

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Specify what you want to
register, and retry the
operation.

The display information has
not been changed.

5030

8510

If this problem persists, call
HP technical support.

An error occurred in client
logic.

7060

8510

If this problem persists, call
HP technical support.

An error occurred in client
logic.

7301

8510

If this problem persists, call
HP technical support.

An error occurred in client
logic.

7302

8510

If the same problem persists
despite retrying, call HP
technical support.

An error occurred. If this
problem persists, call HP
technical support.

7440

8510

To cancel, click [OK].

Do you want to cancel?

9101

8510

Click [OK] to execute the
operation.

Do you want to apply?

9102

8510

Change the CLPR name.

The CLPR name already
exists. The CLPR name will
return to the name that is
displayed before you have
changed.

55235

8510

Change the settings.

The value set for the number
of Cache Residency Manager
areas is outside the valid
range. The value will return
to the one set before.

55236

8510

Change the SLPR name.

The SLPR name already
exists. The SLPR name will
return to the name that is
displayed before you have
changed.

55237

8510

Check the settings and retry
the operation.

Some of the selected ports
cannot migrate to the other
SLPR. Change the settings.

55238

8510

Check the settings and retry
the operation.

Some of the selected parity
groups cannot migrate to the
other SLPR. Change the
settings.

55240

8510

Select another parity group,
and then retry the operation.

The concatenated parity
group cannot be set across
multiple CLPRs. Select another
parity group, and then retry
the operation.

55261

8510

Apply the tentative settings
with no parity groups to the
CLPR that you have created,
and then migrate the parity
group.

The Parity Group cannot be
migrated to the CLPR that you
newly created. Apply the
tentative settings with no
parity groups to the CLPR that
you have created, and then
migrate the parity group.

55262

8510

Remote Web Console Error Codes

421

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands