HP XP20000/XP24000 Manual Download Page 428

Page: 428 / 448

Table 82 Error Codes — Part Code 9105

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Click [OK], and then install
the program product.

The program product is not
installed.

5511

9105

Click [OK], correct the
security group settings, and
then retry the operation.

The settings of the security
group are invalid.

5600

9105

Click [OK], correct the host
group settings, and then retry
the operation.

The settings of the host group
are invalid.

5601

9105

Click [OK], correct the length
of the letter string, and then
retry the operation.

The length of the letter string
is invalid.

5602

9105

Click [OK], specify other
hosts, and retry the
operation.

The DKC emulation is
specified as the type of the
host.

5603

9105

Click [OK], correct the
vendor information, and retry
the operation.

The specified vendor
information is invalid.

5604

9105

Click [OK], delete
unnecessary hosts, and retry
the operation.

You cannot register any more
hosts.

5605

9105

Click [OK], delete the
unmounted LDEV, and retry
the operation.

The target LDEV is not
mounted.

5606

9105

Click [OK], correct the LDEV
group settings, and retry the
operation.

The settings of the LDEV
group are invalid.

5607

9105

Click [OK], check the
attributes of the specified
volumes, and retry the
operation.

The pool group cannot
include volumes to which LU
paths are defined, or volumes
which are not mounted.

5608

9105

Click [OK].

Change the group
attribute or delete the
R-VOL/T-VOL from the
group.

Retry the operation.

The R-VOL/T-VOL exists in a
group which cannot include
R-VOLs and T-VOLs.

5609

9105

Specify a port supported by
this function.

The specified port is not
supported by this function.

5819

9105

Check the specified host and
port.

When the host group has a
host to which ports are set,
the hosts in this host group
cannot be registered in
another host group.

5820

9105

An error occurred during the
SVP processing. If this
problem persists, call HP
technical support.

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

6012

9105

Call HP technical support.

The file operation failed.

6023

9105

428 Remote Web Console for Storage System Messages and Error Codes

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands