HP XP20000/XP24000 Manual Download Page 109

Page: 109 / 448

Table 26 Error Codes — Part Code 1005

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

If this problem persists call HP
technical support.

An error occurred. If this
problem persists call HP
technical support.

1182

1005

Correct the port information
or the PCB mode information.

The port information is
inconsistent with PCB mode
information.

1183

1005

Correct the port information
or the PCB mode information.

The port information is
inconsistent with PCB mode
information.

1184

1005

The configuration information
has been already changed.

Check the settings, and
request the setting of the
configuration information
again.

You are trying to insert in the
linkage operation including
LUSE. (LDEV number is
inserted to the LDEV numbers
created in LUSE).

1185

1005

The configuration information
has been already changed.

Check the settings, and
request the setting of the
configuration information
again.

In the linkage operation
including LUSE, the path is
specified to other than the
top.

1186

1005

The configuration information
has been already changed.

Check the settings, and
request the setting of the
configuration information
again.

You cannot expand the LU
because the host mode of the
group with paths which are
defined in the LU is
corresponding to online
LUSE.

1187

1005

Correct the settings, and then
retry the operation.

To define a path to the
volume from an iSCSI port,
the volume must be
read/write-enabled and also
usable as an S-VOL
(secondary volume).

1190

1005

Correct the settings, and then
retry.

No information can be
changed about this external
port because the port has an
external volume.

1194

1005

Correct the settings, and then
retry.

You cannot set high-speed
mode to a package including
an external port.

1197

1005

Correct the settings, and then
retry.

Since a path is defined to an
external LU, you cannot set
high-speed mode.

1198

1005

Check the setting.

The path cannot be set to the
specified volume because the
volume is not an
open-systems volume.

1199

1005

Change the parameter to a
path where the High Speed
mode/MIX mode can be set,
and then retry the operation.

The selection of High Speed
mode/MIX mode is invalid.
The specified port cannot be
changed to High Speed
mode/MIX mode.

1201

1005

Remote Web Console Error Codes 109

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands