HP XP20000/XP24000 Manual Download Page 381

Page: 381 / 448

Table 64 Error Codes — Part Code 7105

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Wait for Flash Copy
processing of a L1 pair being
finished, and then execute
operation of target pair.

Because a L1 pair is F-Copy,
you cannot operate to L2.

8920

7105

Correct the specified CT
Group and retry the
operation again.

The command was rejected
because the specified CT
Group is already used.

8941

7105

Install the appropriate version
of DKC microcode.

The CT Group operation is
not available because the
target DKC microprogram
version does not support the
CT Group operation.

8942

7105

Reset the Split time of
Consistency Group from the
mainframe host.

A pair status cannot be
changed because the Split
time of Consistency Group is
set.

8946

7105

Withdraw the FlashCopy
Mirroring V2 relationship.

The command has been
rejected, because the
FlashCopy Mirroring V2
relationship exists.

8991

7105

Install additional shared
memory.

The command has been
rejected, because sufficient
amount of shared memory is
not installed.

8992

7105

Set the shared memory
extension setting for
FlashCopy Mirroring V2.

The command has been
rejected, because the shared
memory is not set for
FlashCopy Mirroring V2.

8993

7105

Wait a few seconds, and
retry the operation.

The command has been
rejected, because the storage
system is busy.

8994

7105

Withdraw the FlashCopy
Mirroring V2 relationship.

The command has been
rejected, because the
FlashCopy Mirroring V2
relationship exists.

8995

7105

Wait a few seconds, and
retry the operation.

The command has been
rejected, because the storage
system is busy.

8996

7105

Use the Reverse Resync
option.

Quick Restore cannot be
executed because the
specified pair is composed of
the external volumes with
different cache mode settings.

55645

7105

If this problem persists, call
HP technical support.

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

56301

7105

If this problem persists, call
HP technical support.

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

56302

7105

Remote Web Console Error Codes 381

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands