HP XP20000/XP24000 Manual Download Page 437

Page: 437 / 448

Table 87 Error Codes — Part Code 9605

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Specify an open-system
volume.

The specified logical volume
does not exist.

8120

9605

Retry a little later.

This logical volume is busy.

8122

9605

Check whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.

This function is not supported.

8123

9605

Specify an open-system
volume.

This logical volume is a
mainframe volume.

8124

9605

Review LDEV information,
and then retry.

The attribute of the logical
volume has been changed by
RAID Manager.

8125

9605

Check the logical volume
configuration, and then retry
the operation.

This logical volume is
configured as a command
device.

8126

9605

If this problem persists, call
HP technical support.

A parameter error occurred.

8128

9605

If this problem persists, call
HP technical support.

This error code is not
registered.

8132

9605

You cannot change the
attribute of this logical device
to Read/Write. Call HP
technical support To change
the attribute.

You cannot change the
attribute of this logical volume
to Read/Write. Call HP
technical support if you want
to change the attribute.

8134

9605

Check the logical volume
configuration, and then retry
the operation.

This logical volume is already
used as an S-VOL for XP
Continuous Access or
Business Copy.

8135

9605

The currently licensed
capacity is insufficient. To
increase the licensed
capacity, buy a new license
key.

The command was rejected,
because the licensed capacity
was exceeded.

8136

9605

The Reserved setting of the
specified device cannot be
released. To release the
Reserved setting, call HP
technical support.

The Reserved setting of the
specified volume cannot be
released. To release the
Reserved setting, call HP
technical support.

8138

9605

Check the volume, and then
retry the operation.

The specified volume is a
P-VOL for Business Copy.

8139

9605

Check the volume, and then
retry the operation.

This logical volume cannot be
selected because it is used as
a reserve volume for Auto
LUN.

8141

9605

Check the logical volume,
and then retry the operation.

You cannot select this logical
volume because it is used as
a XP Continuous Access
Journal volume.

8142

9605

Remote Web Console Error Codes 437

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands