HP XP20000/XP24000 Manual Download Page 408

Page: 408 / 448

Table 67 Error Codes — Part Code 8105

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

If this problem persists, call
HP technical support.

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

3006

8105

If this problem persists, call
HP technical support.

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

3007

8105

Change the configuration at
least one line in the
spreadsheet.

The spreadsheet has not been
changed at all.

5030

8105

One line can have up to 127
characters.

The length of the character
string is invalid.

5060

8105

The CSV file can have up to
70,000 lines.

The number of lines is invalid.

5061

8105

Check the CSV file.

The size of the CSV file is
invalid.

5062

8105

Install Configuration File
Loader.

Configuration File Loader is
not installed.

5511

8105

If this problem persists, call
HP technical support.

An error occurred during SVP
processing. If this problem
persists, call HP technical
support.

5566

8105

One line can have up to 127
letters.

The length of the letter string
is invalid.

5650

8105

The spreadsheet can have up
to 70,000 lines.

The number of lines is invalid.

5651

8105

Check the CSV file.

The size of the CSV file is
invalid.

5652

8105

Associate the XP Thin
Provisioning volume with a
pool, and then retry the
operation.

The XP Thin Provisioning
volume is not associated with
a pool. Associate the XP Thin
Provisioning and a pool first.

5660

8105

Enter the text file.

The file format is invalid.

5700

8105

Check the version information
for the first row.

The header is invalid.

5701

8105

Write at least one tag.

There is no tag.

5702

8105

Install the Configuration File
Loader.

Configuration File Loader is
not installed.

5705

8105

Correct the name of CHA.

The specified CHA does not
exist.

5710

8105

Correct the name of the port.

The specified port does not
exist.

5711

8105

Correct the numbers for CU
and LDEV (CU: LDEV).

The numbers specified for CU
and LDEV (CU: LDEV) are
invalid.

5712

8105

Define each tag once in a
sheet.

You set the same tag name
more than once.

5720

8105

408 Remote Web Console for Storage System Messages and Error Codes

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands