HP XP20000/XP24000 Manual Download Page 147

Page: 147 / 448

Table 34 Error Codes — Part Code 3005

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Check volume capacity for
the TP-VOL.

The capacity of XP Thin
Provisioning volume (TP-VOL)
is insufficient.

68726

3005

Wait a few seconds, and
then retry the operation.

Shared memory is being
initialized. Wait a few
seconds, and then retry the
operation.

68727

3005

Recover the pool, and then
retry the operation.

The pool is in an abnormal
state. Recover the pool, and
then retry the operation.

68728

3005

Retry the operation after the
formatting operation has
completed.

LDEV format is being
executed in the specified
volume. Retry the operation
after the formatting operation
has completed.

68729

3005

Wait for a while, and then
retry the operation to the
logical volumes where the
error occurred.

68736

3005

Check the current
configuration of association.

The number of XP Thin
Provisioning volumes that can
be associated with a single
pool has exceeded the
maximum.

68748

3005

Wait for a while, and then
retry the operation.

The disk storage system is
executing the processing to
release the association,
inside.

Wait for awhile, and then
retry the operation.

68751

3005

Remote Web Console Error Codes

147

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands