HP XP20000/XP24000 Manual Download Page 409

Page: 409 / 448

Table 67 Error Codes — Part Code 8105

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Correct the invalid
parameter.

The parameter is invalid.

5721

8105

Write one definition only in
each tag.

Duplicate definition error.

5730

8105

Correct the current
information.

The current information is
invalid.

5731

8105

Correct the name of the CHA.

There is a difference between
the current CHA and the
specified CHA.

5740

8105

Correct the name of the port.

There is a difference between
the current port and the
specified port.

5741

8105

The Channel Speed value is
invalid. Specify a correct
value.

The setting cannot be
performed, because an
invalid Channel Speed value
is set to the specified port.

5742

8105

Correct the CU and LDEV.

There is a difference between
the current CU:LDEV and the
specified CU:LDEV.

5743

8105

Turn on the command device
switch.

The command device security
switch cannot be turned on
because this is not command
device.

5744

8105

Turn on the security switch on
this port.

The security switch on the
port is off. Turn on the switch.

5745

8105

Correct the group ID.

The group ID is invalid.

5746

8105

Correct the name of the
group.

The group cannot be added.
Change the name of the
group.

5747

8105

Correct the group ID.

The group ID does not exist.

5748

8105

Correct the group ID.

The same group ID is already
registered.

5749

8105

Correct the group name.

The same group name is
already registered.

5750

8105

Correct the group ID.

The group ID does not exist.

5751

8105

Correct the group name.

The group name does not
exist.

5752

8105

Correct the port ID and the
group ID.

There is a difference between
the current port ID/group ID
and the specified one.

5753

8105

Correct the CU and LDEV.

The intermediate volume
cannot be specified as a
command device.

5754

8105

Turn on the security switch on
this port.

The security switch on the
port remains off. Turn the
switch on.

5755

8105

Add the WWN to another
port.

The number of WWN cannot
exceed 255 per port.

5756

8105

Remote Web Console Error Codes 409

Summary of Contents for XP20000/XP24000

































































































































































































































































































































































































































































Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands

HP XP20000/XP24000, Manual

Search results

Summary of Contents for XP20000/XP24000

Reviews:

Related manuals for XP20000/XP24000

Brands by name

Popular brands