HP XP20000/XP24000, Manual

Page: 120 / 448

Table 28 Error Codes — Part Code 1110
Failure
Level Severity
Level Recommended Action Error Message Error
Number Part
Code
5 W Correct the specified
contents, and request the
setting of the configuration
information again. The specified host is already
in use. 1064 1110
5 W Correct the specified
contents, and request the
setting of the configuration
information again. The specified name is already
in use. 1065 1110
5 W Remove the prohibited
characters from the
nickname. You cannot use the following
characters for the name:
\ / , : ; * " < > |
You cannot use spaces for the
first and the last characters in
the name.
1110 1110
5 W Enter a correct value, and
retry. The specified WWN is
invalid.
Specify the WWN with 16
characters, using any of the
following combinations:
•
Numerals (0-9),
•
Letters (A-F),
•
Hyphen (-), or
•
Space.
(You cannot specify 0 for all
the 16 characters.)
5000 1110
5 W Correct the specified content,
and retry. The name should be input
using specified letters (a-z
and A-Y) and digits (0-9). 5001 1110
5 W Correct the specified content,
and retry. The Group Name should be
from 1 to 8 characters. 5020 1110
5 W Correct the specified content,
and retry. The name should be from 1
to 8 characters. 5021 1110
5 W Correct the specified content,
and retry. Each area of the WWN
should be 8 characters. 5022 1110
5 W You cannot register a host
group. The maximum number of Host
Groups is already registered. 5040 1110
5 W Reduce the number, and
retry. The maximum number of
hosts is already registered. 5041 1110
5 W Reduce the number, and
retry. The number of LUNs in use
has already reached the
maximum number of LUNs
that can be specified in a
port (2,048 in a Fibre
Channel environment). 5042 1110
5 W Reduce the number, and
retry. The maximum number of
WWN groups is 127. 5043 1110
5 W Reduce the number, and
retry. The maximum number of LUN
groups is 128. 5044 1110
120 Remote Web Console for Storage System Messages and Error Codes