manualshive.com logo in svg

HP Surestore Disk Array 12h - And FC60, Advanced User'S Manual, Page: 362 / 466

Share
Download
HP Surestore Disk Array 12h - And FC60 Advanced User'S Manual Download Page 362

362

        Introduction

HP-UX Troubleshooting Tools 

There are several tools available for troubleshooting the disk array on an HP-UX host. This 
includes monitoring the operation of the disk array and gathering information that will help 
identify and solve the problem. 

•

Array Manager 60 - primarily used to manage the disk array, Array Manager 60 can also 
be used to check the status of the disk array and to retrieve log information. 

•

Support Tools Manager (STM) - the Information Tool of STM is one the most valuable 
sources of information for identifying problems with the disk array. 

Windows NT and Windows 2000 Troubleshooting Tools

The HP Storage Manager 60 software includes a set of tools for troubleshooting the disk 
array. See the HP Storage Manager 60-NT User’s Guide for information on using the HP 
Storage Manager 60 software.

EMS Hardware Event Monitoring (HP-UX Only)

EMS hardware monitoring is one the most important troubleshooting tools available for 
the Disk Array FC60. With EMS monitoring, you can be alerted to problems as they occur, 
allowing you to respond quickly to correct a problem before it impacts disk array 
operation. All components and aspects of disk array operation are monitored. And EMS 
gives you the flexibility to deliver event notification using a variety of different methods.

More information on EMS Hardware Monitoring can be downloaded from the Systems 
Hardware, Diagnostics, and Monitoring section of HP’s Online Documentation web site at 
www.docs.hp.com/hpux/systems. 

Summary of Contents for Surestore Disk Array 12h - And FC60



















































































































































































































































































































































































































































































Reviews:

No comments