manualshive.com logo in svg

HP Surestore Disk Array 12h - And FC60, Advanced User'S Manual, Page: 348 / 466

Share
Download
HP Surestore Disk Array 12h - And FC60 Advanced User'S Manual Download Page 348

348

        Support Tools Manager

xstm — the X Windows Interface 

xstm is the X-Windows screen-based STM interface. Because it is the easiest to use, xstm is 
the recommended interface for systems that support graphical displays. 

The main xstm window displays a map representing system resources. The STM system 
map represents each Disk Array FC60 as two icons labeled “A5277A Array”. See figure 

Figure 89

. Each icon represents one of the disk array controllers, which are identified by 

their hardware paths. Click on the icon for the disk array you will be testing. 

Navigation through xstm is done using menus and submenus. For more information on 
navigating in xstm, download a copy of the STM Quick Reference Guide from the Systems 
Hardware, Diagnostics, and Monitoring section of HP’s Online Documentation website 
(www.docs.hp.com).

Figure 89

xstm Interface Main Window Disk Array Icons

Summary of Contents for Surestore Disk Array 12h - And FC60



















































































































































































































































































































































































































































































Reviews:

No comments