HP P2000 G3 Cli Reference Manual Download

Page: 284 / 532

284 Alphabetical list of commands

show snap-pools

Description

Shows information about snap pools owned by a specified controller or both controllers.

Syntax

show snap-pools [controller a|b|both]

Parameters

controller a|b|both

Optional. Shows snap pools owned by controller A only, by controller B only, or by either controller

(

both

). If this parameter is omitted, all snap pools owned by either controller are shown.

Output

Vdisk

Vdisk name.

Serial Number

Snap pool serial number.

Name

Snap pool name.

Size

Total size of the snap pool volume.

Free

Amount of free space available in this snap pool.

Master Volumes

Number of master volumes associated with this snap pool.

Snapshots

Number of snapshots using this snap pool.

Status

•

Available

: The snap pool is available for use.

•

Offline

: The snap pool is not available for use, as in the case where its disks are not present.

•

Corrupt

: The snap pool’s data integrity has been compromised; the snap pool can no longer

be used.

Threshold

Snap pool threshold level:

•

Warning

: The snap pool is moderately full. When this threshold is reached, an event is

generated to alert the administrator. The default is 75%.

•

Error

: The snap pool is nearly full and unless corrective action is taken, snapshot data loss is

probable. When this threshold is reached, an event is generated to alert the administrator and

the associated snap-pool policy is triggered. The default is 90%.

•

Critical

: The snap pool is 98% full and data loss is imminent. When this threshold is reached,

an event is generated to alert the administrator and the associated snap-pool policy is triggered.

%Usage

Threshold value (percent of snap pool space used) that triggers the threshold’s policy.

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands