HP P2000 G3 Cli Reference Manual Download Page 339

Page: 339 / 532

HP P2000 G3 MSA System CLI Reference Guide 339

verify remote-link

Description

Verifies host-port links between the local system and a specified remote system. All link paths, or

only paths having a specified link type, between the two systems are tested. The remote system must

already have been added by using the

create remote-system

command.For replication purposes,

this tests the links to be used for replication from one system to another system. To verify

bidirectional communication, run this command from the primary system to the secondary system,

and then from the secondary system to the primary system.

Syntax

verify remote-link

remote-system

system

[link-type FC|iSCSI|ALL]

Parameters

remote-system

system

The remote system’s name or the IP address of one of its controller network ports.

link-type FC|iSCSI|ALL

Optional. Specifies the type of host-port links to verify:

•

: Verify FC-to-FC links only.

•

iSCSI

: Verify iSCSI-to-iSCSI links only.

•

ALL

: Verify all FC-to-FC and iSCSI-to-iSCSI links.

If this parameter is omitted, all links are verified.

Output

Port

Port ID on the local system.

Type

•

: FC port.

•

iSCSI

: iSCSI port.

•

Offline

: Port is disconnected.

Links

IDs of linked ports on the remote system.

Example

Verify all links between two 2-port, FC systems:

# verify remote-link remote-system System2

Port Type Links

---------------------------------------

A1 FC A1,A2,B1,B2

A2 FC A1,A2,B1,B2

B1 FC A1,A2,B1,B2

B2 FC A1,A2,B1,B2

---------------------------------------

Success: Command completed successfully. (2013-01-16 15:38:24)

Verify only iSCSI links between two 4-port, FC/iSCSI systems:

# verify remote-link remote-system System2 link-type iSCSI

Port Type Links

---------------------------------------

A3 iSCSI A3,A4,B3,B4

A4 iSCSI A3,A4,B3,B4

B3 iSCSI A3,A4,B3,B4

B4 iSCSI A3,A4,B3,B4

---------------------------------------

Success: Command completed successfully. (2013-01-16 15:38:24)

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands