HP P2000 G3 Cli Reference Manual Download Page 42

Page: 42 / 532

Alphabetical list of commands

clear expander-status

Description For use by or with direction from a service technician.

Clears the counters and status for SAS expander lanes. Counters and status can be reset to a good

state for all enclosures, or for a specific enclosure whose status is

Error

as shown by the

show

expander-status

command.

NOTE:

If a rescan is in progress, the clear operation will fail with an error message saying that an

EMP does exist. Wait for the rescan to complete and then retry the clear operation.

Syntax

clear expander-status [enclosure

]

Parameters

enclosure

Optional. The enclosure number.

Example

Clear the expander status for the first enclosure:

# clear expander-status enclosure 1

Success: Command completed successfully. - Expander status was cleared.
(2012-01-18 14:18:53)

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands