manualshive.com logo in svg

HP P2000 G3, Cli Reference Manual

Share
Download
HP P2000 G3 Cli Reference Manual Download Page 249

HP P2000 G3 MSA System CLI Reference Guide 249

show license

Description

Shows the status of licensed features in the storage system.

Syntax

show license

Output

License Key

•

The license key, if a license is installed and valid.

•

not installed

, if a license is invalid or is not installed.

Maximum Licensable Snapshots

Number of snapshots that the highest-level license allows.

Base Maximum Snapshots

Number of snapshots allowed without an installed license.

Licensed Snapshots

Number of snapshots allowed by the installed license.

In-Use Snapshots

Number of existing licensed snapshots.

Snapshots Expire

•

Never

. License doesn’t expire.

•

Number of days remaining for a temporary license.

•

Expired

. Temporary license has expired and cannot be renewed.

Volume Copy

Shows whether Volume Copy functions are enabled or disabled.

Volume Copy Expires

•

Never

. Always enabled and doesn’t expire.

Replication

Shows whether Remote Snap functions are enabled or disabled.

Replication Expires

•

Never

. License is purchased and doesn’t expire.

•

Number of days remaining for a temporary license.

•

Expired

. Temporary license has expired and cannot be renewed.

•

N/A

. No license installed.

VDS

Shows whether the VDS (Virtual Disk Service) Hardware Provider is enabled or disabled.

VDS Expires

•

Never

. Always enabled and doesn’t expire.

VSS

Shows whether the VSS (Volume Shadow Copy Service) Hardware Provider is enabled or disabled.

VSS Expires

•

Never

. Always enabled and doesn’t expire.

SRA

Shows whether Storage Replication Adapter (SRA) support is enabled or disabled.

SRA Expires

•

Never

. Always enabled and doesn’t expire.

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands