manualshive.com logo in svg

HP P2000 G3, Cli Reference Manual

Share
Download
HP P2000 G3 Cli Reference Manual Download Page 369

HP P2000 G3 MSA System CLI Reference Guide 369

dash-level

string

FRU template revision number.

fru-shortname

string

FRU short description.

mfg-date

string

Date and time, in the format 

year-month-day hour

:

minutes

:

seconds

 

(UTC), when the controller's PCBA was programmed.

mfg-date-

numeric

string

Unformatted 

mfg-date

 value.

mfg-location

string

City, state/province, and country where the FRU was manufactured.

mfg-vendor-id

string

JEDEC ID of the FRU manufacturer.

health

string

•

OK

•

Fault

•

Unknown

health-numeric

string

Numeric equivalents for 

health

 values.

•

0: OK

•

2: Fault

•

3: Unknown

health-reason

string

If Health is not 

OK

, the reason for the health state.

health-

recommendation

string

If Health is not 

OK

, the recommended actions to take to resolve the health issue.

position

string

Position of the controller in the enclosure.

•

Top

: The controller is in the top slot.

•

Bottom

: The controller is in the bottom slot.

position-

numeric

string

Numeric equivalents for 

position

 values.

•

0: Top

•

1: Bottom

phy-isolation

string

Shows whether the automatic disabling of SAS expander PHYs having high error 

counts is enabled or disabled for this controller.

•

Enabled

: PHY fault isolation is enabled. This is the default.

•

Disabled

: PHY fault isolation is disabled.

phy-isolation-

numeric

string

Numeric equivalents for 

phy-isolation

 values.

•

0: Enabled

•

1: Disabled

redundancy-mode

string

The system’s operating mode, also called the cache redundancy mode.

•

Active-Active ULP

: Both controllers are active using ULP (Unified LUN 

Presentation). Data for volumes configured to use write-back cache is 

automatically mirrored between the two controllers to provide fault 

tolerance.

•

Single Controller

: The enclosure contains a single controller.

•

Single Controller

: The enclosure contains a single controller.

•

Fail Over

: Operation has failed over to one controller because its partner 

is not operational. The system has lost redundancy.

•

Down

: Both controllers are not operational.

Table 19

controllers properties (continued)

Name

Type

Description

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands