manualshive.com logo in svg

HP P2000 G3, Cli Reference Manual

Share
Download
HP P2000 G3 Cli Reference Manual Download Page 121

HP P2000 G3 MSA System CLI Reference Guide 121

reset smis-configuration

Description

Resets the SMI-S configuration files. For use by or with direction from a service technician.
This command will reset the configuration of the SMI-S service to default settings. After running this 

command, any hosts registered via SMI-S will need to be registered again.
Messages are displayed when the SMI-S configuration is reset and SMI-S is restarted.

Syntax

reset smis-configuration

[a|b|both]

[prompt yes|no]

[noprompt]

Parameters

a|b|both

Optional. The controller module containing the controller to restart. If this parameter is omitted, the 

command affects the controller being accessed.

prompt yes|no

Optional. Specifies an automatic response to the confirmation prompt:

•

yes

: Allow the command to proceed.

•

no

: Cancel the command.

If this parameter is omitted, you must reply to the prompt.

noprompt

Optional in console format; required for XML API format. Suppresses the confirmation prompt, which 

requires a yes or no response. Specifying this parameter allows the command to proceed without 

user interaction.

Example

Reset the SMI-S configuration on controller A, which you are logged in to:

# reset smis-configuration a

WARNING: The configuration of the SMIS service will be reset to default 
settings.  Any hosts registered via SMIS will need to be registered again. Are 
you sure? 

yes

Info: SMIS service configuration has been reset for local controller. 
(2013-01-10 16:53:51)

Success: Command completed successfully. (2013-01-10 16:53:51)

From controller A, reset the SMI-S configuration on controller B:

# reset smis-configuration b

WARNING: The configuration of the SMIS service will be reset to default   
settings.  Any hosts registered via SMIS will need to be registered again. Are 
you sure? 

yes

Info: SMIS service configuration has been reset for partner controller. 
(2013-01-10 16:55:08)

Success: Command completed successfully. (2013-01-10 16:55:08)

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands