HP P2000 G3 Cli Reference Manual Download

Page: 413 / 532

HP P2000 G3 MSA System CLI Reference Guide 413

hosts

Properties

Example

# show hosts

...

<PROPERTY name="host-profile" type="string">Standard</PROPERTY>

</OBJECT>

...

Table 38

hosts properties

Name

Type

Description

host-id

string

FC or SAS host port WWN, or iSCSI host initiator node name (typically the

IQN).

host-name

string

User-defined name of the host port, or blank.

host-discovered

string

•

Yes

: The host was discovered and its entry was automatically created.

•

: The host entry was manually created.

host-mapped

string

•

Yes

: At least one volume is explicitly mapped to the host.

•

: No volumes are explicitly mapped to the host.

host-profile

string

•

Standard

: The host allows LUN 0 to be assigned to a mapping.

•

OpenVMS

: The host does not allow LUN 0 to be assigned to a mapping.

•

HP-UX

: The host allows LUN 0 to be assigned to a mapping and uses Flat

Space Addressing.

host-bus-type

string

•

If the host was discovered and its entry was automatically created, its host

interface type:

;

iSCSI

;

SAS

•

If the host entry was manually created:

Undefined

host-port-bits-

uint32

For internal use only.

host-port-bits-

uint32

For internal use only.

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands