manualshive.com logo in svg

HP P2000 G3, Cli Reference Manual

Share
Download
HP P2000 G3 Cli Reference Manual Download Page 248

248 Alphabetical list of commands

show job-parameters

Description

Shows parameters for background vdisk scrub, partner firmware upgrade, and other jobs.

Syntax

show job-parameters

Output

Vdisk Background Scrub

Shows whether disks in vdisks are automatically checked for disk defects to ensure system health. The 

interval between background vdisk scrub finishing and starting again is 24 hours.

•

Disabled

: Background vdisk scrub is disabled.

•

Enabled

: Background vdisk scrub is enabled. This is the default.

Partner Firmware Upgrade

Shows whether component firmware versions are monitored and will be automatically updated on 

the partner controller.

•

Disabled

: Partner firmware upgrade is disabled.

•

Enabled

: Partner firmware upgrade is enabled. This is the default.

Utility Priority

Priority at which data-redundancy utilities, such as vdisk verify and reconstruct, run with respect to 

I/O operations competing for the system's processors. (This does not affect vdisk background scrub, 

which always runs at “background” priority.)

•

High

: Utilities have higher priority than host I/O. This can cause heavy I/O to be slower than 

normal. This is the default.

•

Medium

: Utility performance is balanced with host I/O performance.

•

Low

: Utilities run at a slower rate with minimal effect on host I/O.

Example

Show a system’s job parameters:

# show job-parameters

Job Parameters

--------------

Vdisk Background Scrub: Disabled

Partner Firmware Upgrade: Enabled

Utility Priority: High

Success: Command completed successfully. (2012-01-18 15:07:25)

Basetypes

•

job-parameters

•

status

See also

•

set job-parameters

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands