manualshive.com logo in svg

HP P2000 G3, Cli Reference Manual

Share
Download
HP P2000 G3 Cli Reference Manual Download Page 113

HP P2000 G3 MSA System CLI Reference Guide 113

replicate volume

Description

Creates a replication snapshot of the specified volume and initiates a replication operation. This 

command can follow a 

create replication-set

 command that did not specify to initiate replication. 

If the snapshot you want to replicate already exists, use the 

replicate snapshot

 command instead.

NOTE:

If replication requests are sent to a secondary system whose temporary replication license 

has expired, the requests are queued but are not processed, and the secondary system reports event 

472. If this condition occurs, check for this event in the event log, event-notification emails, and 

SNMP traps. To continue using replication, purchase a permanent replication license.

Syntax

replicate volume

[set 

replication-set

]

snapshot 

replication-snapshot

[preserve-snapshot 

external-snapshot

]

volume

 

Parameters

set 

replication-set

Optional. Name or serial number of the replication set.

snapshot 

replication-snapshot

Name for the new replication snapshot.

preserve-snapshot 

external-snapshot

Optional. Name of the external snapshot to use as the source for this replication. This preserves the 

snapshot that is being used to replicate the volume as an external snapshot; otherwise, the snapshot 

is converted to a replication snapshot.

volume

Name or serial number of the primary volume to replicate. If the name is not unique across 

replication sets, specify the 

set

 parameter.

Example

Replicate volume 

MV1

 and name the replication snapshot 

RepSnap1

:

# replicate volume snapshot RepSnap1 MV1

Info: The replication has started. (RepSnap1)

Success: Command completed successfully. (2012-01-20 10:53:25)

See also

•

show replication-sets

•

show replication-volumes

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands