HP P2000 G3 Cli Reference Manual Download Page 78

Page: 78 / 532

Alphabetical list of commands

delete host

Description

Deletes a discovered or manually created host. In order to delete a discovered host, it must have a

nickname. If the host is not mapped or has only default mappings, you can delete it. If the host has

explicit mappings, you must delete the mappings before you can delete the host.

Syntax

delete host

host

Parameters

host

The ID or nickname of the host.

Example

Delete the manually created host named

MyHost

# delete host MyHost

Success: Command completed successfully. (2012-01-18 17:06:41)

Delete the discovered host named

Host1

# delete host Host1

Success: Command completed successfully. (2011-10-10 17:06:51)

Try to delete the mapped host whose ID is

100000062b0e5e15

# delete host 100000062b0e5e15

Error: The specified host is mapped to one or more volumes so the host was not
deleted. (2012-01-18 17:10:20)

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands