HP P2000 G3 Cli Reference Manual Download Page 123

Page: 123 / 532

HP P2000 G3 MSA System CLI Reference Guide 123

reset snapshot

Description

Deletes the data in a standard snapshot and resets it to the current data in the associated master

volume. The snapshot’s volume characteristics are not changed. The command prompts you to

unmount/unpresent/unmap the snapshot from hosts before performing the reset; leaving it mounted

can cause data corruption. This command is not allowed for a replication snapshot.

CAUTION:

All data represented by the snapshot as it exists prior to issuing this command is lost.

Syntax

reset snapshot

[prompt yes|no]

volume

Parameters

prompt yes|no

Optional. Specifies an automatic response to the prompt to unmount/unpresent/unmap the snapshot

before proceeding:

•

yes

: Allow the command to proceed.

•

: Cancel the command.

If this parameter is omitted, you must reply to the prompt.

volume

Name or serial number of the snapshot to reset. For volume syntax, see

Command syntax

page 22.

Example

Reset snapshot

SS1

# reset snapshot SS1

You MUST unmount the snapshot from all hosts before resetting it.

Ready to continue?

yes

Success: Command completed successfully. - The reset of a snapshot completed.
(SS1) - The reset of a snapshot completed. (2012-01-21 13:02:59)

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands