HP P2000 G3 Cli Reference Manual Download Page 165

Page: 165 / 532

HP P2000 G3 MSA System CLI Reference Guide 165

set ntp-parameters

Description

Sets Network Time Protocol (NTP) parameters for the system. You can manually set system date and

time parameters by using the

set controller-date

command.

Syntax

set ntp-parameters

ntp enabled|disabled|on|off

ntpaddress

IP-address

ti|-

]

Parameters

ntp enabled|disabled|on|off

Enables or disables use of NTP. When NTP is enabled and the specified NTP server is available,

each controller’s time is synchronized with the server.

ntpaddress

IP-address

The network address of an available NTP server.

timezone

+|-

]

The system’s time zone as an offset in hours (-1 to -12, +1 to +13) and minutes (0–59) from

Coordinated Universal Time (UTC). For example, the Pacific Time Zone offset is -8 during Pacific

Standard Time or -7 during Pacific Daylight Time.

Example

Set the system to use NTP with an offset for the Mountain Time zone:

# set ntp-parameters ntp enabled ntpaddress 69.10.36.3 timezone -7

Success: Command completed successfully. - Date/Time successfully set.
(2011-10-11 14:52:19)

Set the system to use NTP with an offset for the Bangalore, India, time zone:

# set ntp-parameters ntp enabled ntpaddress 69.10.36.3 ti5:30

Success: Command completed successfully. - Date/Time successfully set.
(2011-10-11 14:52:29)

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands