HP P2000 G3, Cli Reference Manual

Page: 317 / 532

HP P2000 G3 MSA System CLI Reference Guide 317
show volume-maps
Description Shows mapping information for a specified volume or for all volumes.
Syntax
show volume-maps [ volume ]
Parameters
volume
Optional. Name or serial number of the volume to show mappings for. For volume syntax, see
Command syntax on page 22. If this parameter is omitted, information for all volumes is shown.
Output
Serial Number
Volume serial number.
Name
Volume name.
Ports
• Controller host ports that the mapping applies to.
• Blank if not mapped or mapped as
no-access
.
LUN
• LUN that identifies the volume to a host.
• Blank if not mapped or mapped as
no-access
.
Access
Type of host access to the volume:
•
read-write
: The host has read and write access to the volume. This is the default.
•
read-only
: The host has read access to the volume.
•
no-access
: The host is denied access to the volume.
•
not-mapped
: The host is not mapped to the volume.
Host-Port-Identifier
• FC and SAS: Host WWPN.
• iSCSI: Host initiator node name (typically the IQN).
•
all other hosts
for the volume’s default mapping.
Nickname
Host nickname, or blank if not set or for
all other hosts.
Profile
•
Standard
: The host allows LUN 0 to be assigned to a mapping.
•
OpenVMS
: The host does not allow LUN 0 to be assigned to a mapping.
•
HP-UX
: The host allows LUN 0 to be assigned to a mapping and uses Flat Space Addressing.