HP P2000 G3 Cli Reference Manual Download

Page: 238 / 532

238 Alphabetical list of commands

show host-maps

Description

Shows mapping information for volumes that are mapped to all hosts or to a specified host.

Syntax

show host-maps [

host

]

Parameters

host

Optional. Specifies the host’s nickname or ID. If this parameter is omitted, mapping information for

all hosts is shown

Output

•

For FC and SAS: Host WWPN.

•

For iSCSI: iSCSI host initiator’s node name (typically the IQN).

Name

Host port nickname.

Profile

•

Standard

: The host allows LUN 0 to be assigned to a mapping.

•

OpenVMS

: The host does not allow LUN 0 to be assigned to a mapping.

•

HP-UX

: The host allows LUN 0 to be assigned to a mapping and uses Flat Space Addressing.

Name

Name of the volume seen by the host.

Serial Number

Serial number of the volume seen by the host.

LUN

LUN used to access the volume.

Access

Type of host access to the volume:

•

read-write

: Read and write.

•

read-only

: Read only.

•

no-access

: No access.

Ports

Controller host ports that the mapping applies to.

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands