HP P2000 G3 Cli Reference Manual Download

Page: 176 / 532

176 Alphabetical list of commands

set schedule

Description

Changes parameters for a specified schedule. If you want to change the schedule name, create a

new schedule to replace the existing one.
When scheduling

ReplicateVolume

tasks, a best practice is to schedule no more than three

volumes to start replicating at the same time, and for those replications to recur no less than 60

minutes apart. If you schedule more replications to start at the same time, or schedule replications to

start more frequently, some scheduled replications may not have time to complete.

Syntax

set schedule

schedule-specification "

specification

task-name

task-name

schedule-name

Parameters

schedule-specification "

specification

Defines when the task will first run, and optionally when it will recur and expire. You can use a

comma to separate optional conditions. Dates cannot be in the past. For times, if neither

nor

is specified, a 24-hour clock is used.

•

start

yyyy-mm-dd

[AM|PM]

Specifies a date and a time in the future to be the first instance when the scheduled task will run,

and to be the starting point for any specified recurrence.

•

[

every

Specifies the interval at which the task will run.

For better performance when scheduling a

TakeSnapshot

task that will run under heavy I/O

conditions or on more than three volumes, the retention count and the schedule interval should be

set to similar values; for example if the retention count is 10 then the interval should be set to 10

minutes.

For a

ReplicateVolume

task, the minimum interval is 30 minutes.

•

[between

[AM|PM] and

[AM|PM]]

Constrains the time range during which the task is permitted to run. Ensure that the start time is

within the specified time range.

•

st|

nd|

rd|

Constrains the days or months when the task is permitted to run. Ensure that this constraint

includes the start date.

•

[count

]

Constrains the number of times the task is permitted to run.

•

[expires

yyyy-mm-dd

[AM|PM]]

Specifies when the schedule expires, after which the task will no longer run.

task-name

task-name

The task to run. The name is case sensitive.

schedule-name

Name of the schedule to change.

Example

Change parameters, including the associated task, for schedule

Sched1

# set schedule schedule-specification "start 2011-01-01 00:01 every 1 days
expires 2011-12-31 00:01" task-name Snap Sched1

Success: Command completed successfully. (Sched1) - The schedule was modified.
(2011-10-14 08:28:50)

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Related manuals for P2000 G3

Brands by name

Popular brands