HP P2000 G3 Cli Reference Manual Download Page 76

Page: 76 / 532

Alphabetical list of commands

delete chap-records

Description

For iSCSI, deletes a specified CHAP record or all CHAP records. This command is permitted whether

or not CHAP is enabled.

Syntax

To delete the CHAP record for a specific originator:

delete chap-records name

originator-name

To delete all CHAP records:

delete chap-records all

Parameters

name

originator-name

The originator name, typically in IQN format.

all

Delete all CHAP records in the database.

Example

Delete the CHAP record for a specific originator:

# delete chap-records name iqn.1991-05.com.microsoft:myhost.domain

Success: Command completed successfully. (iqn.1991-05.com.microsoft:myhost
.domain) - The CHAP record was deleted. (2012-01-20 12:40:22)

Delete all CHAP records, of which two exist:

# delete chap-records all

Info: Removed CHAP record 0.

Info: Removed CHAP record 1.

Success: Command completed successfully. - All CHAP records were deleted.
(2012-01-20 12:40:22)

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands