HP P2000 G3 Cli Reference Manual Download Page 213

Page: 213 / 532

HP P2000 G3 MSA System CLI Reference Guide 213

show disks

Description

Shows information about all disks in the storage system. If no parameter is specified, the command

shows information for all installed disks.

NOTE:

In console format, to aid reading, disks are sorted to display in order by enclosure and disk

number. In API formats, output is not sorted because it is expected to be manipulated by a host

application.

Syntax

To show information about disks:

show disks

[

disks

]|[free]|[all]|[vdisk

vdisk

]

[perf]

To show information about all disk slots:

show disks encl

Parameters

disks

Optional. IDs of the disks to show information about. For disk syntax, see

Command syntax

page 22.

free

Optional. Shows information about all disks that are available.

all

Optional. Shows information about all installed disks.

vdisk

vdisk

Optional. Shows information for disks in the specified vdisk. For vdisk syntax, see

Command syntax

on page 22.

perf

Optional. Shows performance statistics from the latest historical sample for each disk. Statistics

shown include total I/Os (reads and writes), total amount of data transferred, and average I/O

response time.

encl

Optional. Shows information about each disk slot, whether it contains a disk or not. Do not specify

this parameter with other parameters; they will be ignored.

Output Without the

encl

option:

Location

Disk’s enclosure ID and slot number.

Serial Number

Disk serial number.

Vendor

Disk vendor.

Rev

Firmware revision number.

Summary of Contents for P2000 G3





















































































































































































































































































































































































































































































































































Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands

HP P2000 G3, Cli Reference Manual

Search results

Summary of Contents for P2000 G3

Reviews:

Brands by name

Popular brands