ENGINE (J05E)/TROUBLESHOOTING
2–5
1.
ILLUSTRATION OF CONNECTOR AND MEASUREMENT ON TERMINAL
2
3
1
5
6
4
2
1
3
5
4
6
LOCK
TO BE CONNECTED
MALE
CONNECTOR
FEMALE
CONNECTOR
FEMALE
CONNECTOR
2 3
1
5 6
4
MALE
CONNECTOR
2
1
3
5 4
6
ILLUSTRATION OF CONNECTOR
NUMBERING OF CONNECTOR TERMINALS
PRECAUTIONS FOR TERMINAL MEASUREMENT
ILLUSTRATION OF CONNECTOR AND
MEASUREMENT SURFACE
VIEW A
VIEW B
B
A
The illustration of a connector contained in this document
represents an image of a connector with its lock positioned
on top as viewed from the connecting face.
The terminals are symmetrically numbered (symmetrically
reversed numbering) as viewed on the connecting faces of a
pair of connectors.
The terminal #1 is located at the top right corner of a male
connector and at the top left corner of a female connector
respectively in this document.
Unless otherwise specified in this document, the illustration
of a connector represents an image of a connector as viewed
from the connecting face. A test probe must access the back
face of a connector.
However, some types of connector do not allow a test probe
to contact with the back face such as a waterproof connector.
In such case, a test probe may be allowed to access the front
face of a connector but a special care must be used to avoid
a risk of damage in terminals.
As to a connector that is designed to use the signal check
harness for terminal measurement, do not place a test probe
directly onto the front or back face. Use a contact box of the
connected signal check harness to take measurement on
terminals.
The illustration of a connector contained in this document
represents an image of a connector as viewed from the
connecting face. For example, the terminal #1 of a female
connector is located at the top left corner of a connector as
viewed from the connecting face.
In actual measurement on the terminal #1 of a female
connector, a test probe must be placed onto the top right
corner on the back face of a connector.
WATERPROOF CONNECTOR
INCORRECT
INCORRECT
CORRECT
CORRECT
SHTS021270300001
