ENGINE (J05E)/TROUBLESHOOTING
2–654
INSPECTION PROCEDURE: P0642
1.
Connect the vehicle to HINO DX
Ⅱ
.
2.
Erase the trouble history and set the starter key to the "LOCK"
position.
3.
Disconnect the common rail pressure sensor1 (main) connector.
4.
Set the starter key to the "ON" position.
5.
Select [Engine] and check if P0642 has been detected.
NO
YES
1.
Erase the trouble history and set the starter key to the "LOCK"
position.
2.
Disconnect the accelerator sensor 2 connector.
3.
Set the starter key to the "ON" position.
4.
Select [Engine] and check if P0642 has been detected.
NO
YES
1
Check the DTC detected 1 (Engine ECU)
SHTS021270300595
Has DTC P0642 been detected?
Connect the connector, and go to step 2.
Replace the common rail pressure sensor1
(main).
Perform "After-inspection work" of INFOR-
MATION section.
2
Check the DTC detected 2 (Engine ECU)
SHTS021270300596
Has DTC P0642 been detected?
Connect the connector, and go to step 3.
Replace the accelerator sensor 2.
Perform "After-inspection work" of INFOR-
MATION section.